Advertisement
Quick Links
MAS90: 5043-43250
SUMMIT BUNK FRAME HARDWARE
QTY:
32
100MM DECORATIVE HEAD LAG BOLTS
1
4MM ALLEN WRENCH
4
1/2" X 3" FLUTED WOODEN DOWELS
20
6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW
1
4MM DRIVER FOR POWER DRILL
ASSEMBLY: 2 PERSONS AND 60 MINUTES
TOOLS:
1)
4mm Allen Wrench (INCLUDED)
2)
4mm Allen Drill Bit (Be sure to FULLY SEAT bit into bolt head before turning)
3)
Phillips head Screwdriver or Drill with Phillips Bit
*We recommend using a power driver with the drill bit if available*
BE SURE THAT LAG BOLTS ARE STARTED INTO THE HOLES ON THE FRAME RAILS DURING
ASSEMBLY. DO NOT FULLY TIGHTEN UNTIL ASSEMBLY IS COMPLETE
DESCRIPTION:
7030-00449 KIT
Advertisement
Related Manuals for Living Spaces SUMMIT 4674
Summary of Contents for Living Spaces SUMMIT 4674
- Page 1 7030-00449 KIT MAS90: 5043-43250 SUMMIT BUNK FRAME HARDWARE QTY: DESCRIPTION: 100MM DECORATIVE HEAD LAG BOLTS 4MM ALLEN WRENCH 1/2" X 3" FLUTED WOODEN DOWELS 6 X 1 1/4" PHIL FLAT PARTICLE BOARD SCREW 4MM DRIVER FOR POWER DRILL ASSEMBLY: 2 PERSONS AND 60 MINUTES TOOLS: 4mm Allen Wrench (INCLUDED) 4mm Allen Drill Bit (Be sure to FULLY SEAT bit into bolt head before turning)
- Page 2 7030-00449 4674/4675 SUMMIT FULL/FULL BUNK BED PARTS LIST: 32 - 100mm Decorative Head Lag Bolts 1 - 4mm Allen Wrench 2 - Top End Assemblies 2 - Bottom End Assemblies 4 - 5" x 75" Mattress Rails w/Support Cleats 4 - 3 1/4" x 75" Guard Rails 4 - 1/2"...
- Page 3 00500 SAFETY WARNING Summit Bunk Beds have been tested by an Independent Laboratory and are certified to be in compliance with: ASTM F-1427, “Standard Consumer Safety Specification for Bunk Beds” and U.S. Government specifications 16 Code of Federal Regulations, parts 1213 and 1513. SAFETY WARNINGS 1.