Osd Warning Messages - Dell S2421HS User Manual

OSD warning messages

When the monitor does not support a particular resolution mode, you can see the
following message:
S2421HS/S2421HSX
Dell 24 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 60Hz
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving
from the computer. See
frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You can see the following message before the DDC/CI function is disabled:
S2421HS/S2421HSX
Dell 24 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
When the monitor enters the Standby mode, the following message appears:
S2421HS/S2421HSX
Dell 24 Monitor
Going into Standby mode...
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will
appear depending on the selected input:
48 | Operating the monitor
or any other monitor
S2421HS/S2421HSX
Resolution Specifications
No
S2421HS/S2421HSX
S2421HS/S2421HSX
S2721HS/S2721HSX
Dell 27 Monitor
The current input timing is not supported by the monitor display. Please
change your input timing to 1920x1080, 60Hz
listed timing as per the monitor specifications.
for the Horizontal and Vertical
S2721HS/S2721HSX
Dell 27 Monitor
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
S2721HS/S2721HSX
Dell 27 Monitor
Going into Standby mode...
or any other monitor
S2721HS/S2721HSX
No
S2721HS/S2721HSX
S2721HS/S2721HSX