Step 12
Attach X6 to X1 and X2
Secure each side using Z1, Z4 and Z5
Attach X3 to X1 and X2
Align holes and hold in position
Step 13
Insert the end of X4 into X1; secure using Z2, Z4 and Z5.
In the same way, fix the other end of x4 with X2
Insert Z1 into Z4 and insert into X1, X2 and X3 as shown.
Insert Z8 into Z4 and insert into X1, X2 and Y2 as shown.
Z3 and Z5 to X1 Do not secure at this step, to allow adjustment in next step.
18