Water Drainage - ohmex AIR 9000 CON Instructions For Use And Maintenance Manual

EN
Sleeping mode
• Press key "SLEEP" ( "22" or "44" button) to enter into sleeping mode, default value of
fan speed is low.
• When sleeping mode turns on, under cooling mode, one hour later, temperature will
go up 1°C from setting temperature, and then keep the same; under heating mode,
one hour later, temperature will go down 1°C from setting temperature, and then
keep the same.
• Sleeping mode is invalid under dehumidifying and fan mode. Under water full, ma-
chine standby and mode conversion, sleeping mode will be cancelled.
Compressor protection
• Three minutes later after power on / restart, compressor starts to run.
> > Water Drainage
This machine with auto-water-evaporating system. Condensed-water cycle to cool down
the condenser, which will not only improve cooling efficiency, but also save energy.
• If inner water tank is full, "WATER FULL" indicator will flashed on the screen, 8 seconds
later machine enter into standby mode, buzzer shouts , compressor stops and all
keys is invalid till machine recovers to be normal.
OWork as described in the "CLEANING - Water drainage" paragraph.
In order to avoid electric shocks, please
power-off the machine and pull out
plug before maintenances or repairs.
• For the appliance body external cleaning use a damp cloth avoiding to use abra-
sive detergents.
98
USE
CLEANING
AIR 9000 CON