Scan Function - Cobra MicroTalk PMR300 How To Use Manual

PMR300-UK.qx copy 6/21/99 11:45 AM
Advanced Features

Scan Function

Scan Function
1 Rotate ON - OFF Volume Control
An audible "tone" will indicate that the unit is
on. The LCD will go through a 3-second self-
test and then go to operational mode.
Note
The Mi c ro Talk "ze ros out" t h e
s u bchannels to allow sca n-
ning of the main channels.
Push and release
2
main channel flashes.
28
Page 28
clockwise.
button until icon and
Advanced Features
Push and release either
3
unit will begin scanning the main channels.
Unit will continue to scan all main channels
4
and stop if an incoming transmission is
detected.
Your MicroTalk will pick it up for 10 seconds.
Within 10 seconds you can:
Push and hold button and talk. Your radio will
A
return to operational mode on that channel.
or...
Push and release either
B
scan the main channel.
or...
Proceed to subchannel scan on next page.
C
button and the
button to re-
continued
29