Hansen Technologies HGD-EC-NH3-100 Specifications, Applications, Service Instructions & Parts page 2

AMBIENT TEMPERATURE RANGE
VOLTAGE REQUIREMENTS
HUMIDITY RANGE (NON-CONDENSING)
OUTPUTS
4-20mA SIGNAL OUTPUT
ALARMS
ALTITUDE
ENCLOSURE
ACCURACY
Start-up / Warm-up Time
Approvals
* Up to 400% longer at temperature limits
DO NOT SUBSTITUTE OR MODIFY
Because of the danger of introducing additional hazards,
do not install substitute parts or perform unauthorized
modifications to the equipment.
A100h
JANUARY 2020
Remote Gas Detector
-40°F (-40°C) to 120°F (50°C)
24 VDC + 18%, 24 VAC + 20%
5-90% RH, 15-90% RH (electrochemical)
4-20mA, 0-5V, 1-5V, 0-10V, 2-10 VDC
Isolated 2-wire
(3) SPDT RELAY, 1A @ 30V resisave load
0-2,000m
IP67
SC - <-10%/+15%, IF/EC - < + 5%
SC - 15min*, EC - 5min*, IF - 2 min*
CE/EN 50270:2015/UL/CSA/IEC/EN 61010-1
TABLE 1
2
2 or 8 Channel Gas Detector Controller
-4°F (-20°C) to 122°F (50°C)
100-240 VAC, 50/60 Hz, 80W max
5-90% RH
RS485 Modbus RTU Slave
N/A
(3) SPDT RELAY, 1A @ 30V resisave load
N/A
NEMA 1
N/A
N/A
UL/CSA/IEC/EN 61010-1 CE
CLEANING/DECONTAMINATION
EXTERNAL SURFACE
The external surface, excluding the sensor element, can
be cleaned using light detergent and water. Do not allow
any of the solution to come in contact with the sensing
element sintered surface.
Handheld Gas Detector
-13°F (-25°C) to 131°F (55°C)
'D' Cell BaVery
0-95% non-condensing
RS-232, 0-1 VDC analog
N/A
High, low, off
N/A
N/A
Approx + 5%
Up to 24hrs if not biased
N/A