Proactive PROTEKT 600 STAND Owner's Manual page 15

•
The operator of the lift shall inspect the lift before each use. Check all bolts for
tightness. Make sure the base can be easily widened, and that all lift parts are
in place. Make sure that casters can be turned freely, and that caster brakes
can be engaged. Make certain all necessary items (i.e. slings, and
wheelchairs, etc.) are ready for use.
•
At least once a month, the lift should be thoroughly inspected by a person
qualified to recognize any signs of wear and tear, and looseness of bolts or
parts. Replace any worn parts immediately.
•
To lubricate, put a drop of oil on the following points when the lift is placed into
service and every month thereafter. Top of Mast, Spreader Hinge, and Casters.
Item
1. Boom & Spreader Bar :
•
Check connections between 1) Boom and
Spreader Bar 2) Boom and Mast for
improper connection, looseness, or wear.
•
Check the Boom for bending and
deflection.
2. The Mast :
•
Check Mast for bending or deflection.
3. The Base & Foot Peddle :
•
Check bolts and nuts for looseness.
•
Check casters and bolts for tightness.
•
Check rubber parts of the casters for
deflection.
•
Apply grease to caster ball bearings if
needed.
•
Check welding joints for rust and crack.
4. Cleaning :
•
Any time needed.
5. Actuator & Control Box:
•
Make sure the control box is firmly affixed
to the mast.
•
Make sure the pins firmly affix the
actuator to the Boom and the Mast.
•
Make sure the connecting cable of actuator
and control box is not loose.
•
Make sure that the Battery Indicator shows
at least 2 green LED prior to use.
In the
Monthly
Beginning
•
•
•
•
•
•
•
•
•
•
15
Every
3 Month
•
•
•
•
•
•
•
•
•
•
•
•
•