Magene H64 User Manual

Magene H64 User Manual

Getting Started

•
Remove the battery cover by twisting clockwise. Set aside the cover and remove
the battery. Remove the transparent plastic battery buffer, then replace the
battery and battery cover.
•
Moisten the electrode areas of the strap.
• Attach the transmitter to the strap.
• Adjust the strap length to fit tightly but comfortably. Tie the strap around your
chest, just below the chest muscles, and attach the hook to the other end of the
strap.
• Check that the most electrode areas are firmly against your skin and that the
logo of the transmitter is in a central and upright position.

Pairing with Apps

Note: The Bluetooth and ANT+ interface is disabled by default. The Bluetooth or ANT+
connection will be established when the transmitter is correctly worn and the heart
rate is detected. Therefore the device will not pair until it is worn on the body.

Bluetooth Pairing

• Note: Pairing must be completed within the app settings, and not in your devices
Bluetooth settings.
• Open the app that you would like to pair with. Instructions vary for each app, but
typically you can add or scan for heart rate sensor within the app's settings.

ANT+ Pairing

If you want to pair through ANT+, you need a device with built in ANT+ support, or an
ANT+ dongle.