Aligning The Appliance Top With The Other Kitchen Units; Fitting The Appliance Under The Kitchen Work Surface - Zanussi Electrolux ZSS 7/5 W Instruction Booklet

Aligning the appliance top with the
other kitchen units
The appliance comes with the top aligned with the
door. To change the alignment, follow the instructions
below:
Remove the screws (A-Fig.) fixing the rear brackets
to the top; move the top and, having selected the
new position, refit the screws.
14
Fitting the appliance under the
kitchen work surfaces
This appliance can also be fitted under your existing
kitchen unit tops following the instructions below:
remove the screws (A) fixing the rear brackets (C) to
the top, detach the top from the catches (B) and
remove (see figure).