Page 1
ATTENTION: Installer please leave these Instructions with the homeowner. DV ReFace Screen For Direct Vent Gas Fireplaces Installation & Operating Instructions Stoll Industries 153 Highway 201 Abbeville, SC 29620 customerservice@stollindustries.com www.stollindustries.com...
Page 2
Figure 2 the DV ReFace frame lines up with the DV-Fireplace frame. (Figure 1) • Align the Rare Earth Magnets on the back of DV ReFace Screen frame. Place the magnets where they will fully contact the DV-Fireplace frame. (Figure 2) Handle the magnets carefully! They are very strong and can easily pinch fingers.
Page 3
• The Artisan style DV ReFace Screen (Figure 5) lifts off easily, leaving the frame attached to the DV-Fireplace. Use all four magnets to keep the frame secure.
Page 4
Turning on the kitchen vent hood or a clothes dryer pulls cold air in through the fireplace. Glass doors help stop the cold drafts. For more serious down-drafting Stoll makes Air-Seal doors that are gasketed for a better seal.
Need help?
Do you have a question about the DV ReFace and is the answer not in the manual?
Questions and answers