Advertisement
UUVS702B
4. Fit the groove of the license plate (1)
5. Lift and support the cargo bed and
to the U-bolt as shown in the figure
then connect the wire to the lamp
and tighten the flange nut (3) to
connector.
secure the bracket into place.
Align the U-bolt with the groove of the
license plate bracket (7) as shown in
the figure. Then, tighten the flange nut
(2) to fix the bracket, and fit the cap
nut (6) onto the nut.
6. Take off the connector cap of the wire
on UTV body.
MEC2200(UD120)-번호판조합-영문.indd 2
UUVS706B
UUVS703B
7. Connect the license plate wire (8) to
the UTV body wire (A) as shown in
the figure.
UUVS704A
UT2S404A
8. Fix the wire with cable ties (4) along
the ROPS frame as shown in the
figure.
2014-09-30 오전 10:24:58
Advertisement
