Table of Contents
Advertisement
English
Transformers 50 VA-16 V and 52 VA-12/18 V
2. Safety instructions
No conversions and repair attempts!
Do not make any conversions or changes to your transformer. Do not
open or disassemble it. Do not replace a damaged mains cable, in
which case dispose of the transformer.
Protect from moisture!
The transformer must not become damp or wet. Therefore, use it only
in closed and dry rooms.
Protect it from external damage!
Do not expose the transformer to strong vibrations, strong mechanical
stress or direct intensive sunlight.
Make sure that the mains cable is not crushed or damaged by sharp-
edged objects.
If the housing or the insulation of the mains cable is damaged, do not
continue to use the transformer.
Protect from overheating!
Ensure that the transformer is able to release the heat generated
during operation to the ambient air. Therefore, never cover or install it.
Otherwise the transformer may overheat.
Protect it from falling down!
Always place the transformer on a stable surface. The transformer can
be damaged even if it is dropped from a low height. There is also a risk
of injury due to its heavy weight.
Connect it correctly!
The transformer is only approved for connection to an AC voltage of
230 V/AC, 50 Hz. Never try to operate the device at a different voltage.
Observe the further instructions in Section 4 "Installation, connection
and commissioning".
Page 4
Advertisement
Table of Contents
