Harbor Freight Tools Portland Saw 68111 Instructions And Precautions

BIMETAL
HOLE SAW SET
(3, 7 AND 14-PIECE)
Model
INSTRUCTIONS AND PRECAUTIONS
Visit our website at: http://www.harborfreight.com
SAVE THESE
INSTRUCTIONS. READ
ALL PRECAUTIONS
AND INSTRUCTIONS.
©
Copyright 2010 by Harbor Freight Tools
reserved. No portion of this document or any artwork
contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight
Tools. Diagrams within this document may not be drawn
proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call
1-800-444-3353.
68111 68112
68113
®
. All rights
SPECIFICATIONS
68111 Hole Saw 3", 4", 4-1/4" Hole Saws
3-Piece Set
7/8", 1", 1-1/8", 1-1/4", 1-1/2"
68112 Hole Saw Hole Saws
7-Piece Set Small / Large Mandrel
Pilot Drill
3/4", 7/8", 1-1/8", 1-3/8", 1-1/2",
1-3/4", 2", 2-1/8", 2-1/4", 2-1/2"
68113 Hole Saw
Hole Saws
14-Piece Set
Small / Large Mandrel
Pilot Drill
UNPACKING
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at
1-800-444-3353 as soon as possible.
IMPORTANT SAFETY INFORMATION
To prevent serious injury and property damage:
1. Wear ANSI-approved safety goggles and heavy-
duty work gloves during use.
2. Kits contain sharp blades. Keep away
from children.
3. Use correct size arbor for selected Hole Saw.
4. Verify drill's chuck is in good condition and fits
securely; loose fittings can lead to property
damage and personal injury.
5. Do not use excessive pressure when cutting
a hole.
6. Use as intended only; do not modify tools.
7. Inspect before every use; do not use if parts are
loose or damaged.
8. Use both hands when drilling and keep blades at
90° to stock being cut.
9. Keep all saw blades stored in Set and keep Case
in secure location away from children.
10. Read and adhere to all safety warnings and
operating instructions of drill used with Set.
11. The warnings, cautions, and instructions
discussed in this instruction manual cannot cover
all possible conditions and situations that may
occur. It must be understood by the operator that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator.