Table of Contents
Advertisement
Drink dispenser
The container for cooling drinks (Fig. 9) is located in
the door of the fridge. It is easily removed from its
runners for filling and cleaning by pushing it
upwards from the left side and then by pulling
sharply outwards. Remove the clip on lid to fill.
D208
To pour a drink, press a glass upwards against the
tap arms. To stop the flow of liquid remove the
glass.
Before using the dispenser, we recommend that you
rinse it several times with hot water. For a
thorough cleaning of the container add a spoonful of
bicarbonate of soda to the rinsing water. Push the
dispenser tap on and off several times to allow
sugar deposits from soft drinks or wines to dissolve,
or alternatively remove for cleaning by unscrewing
in an anticlockwise direction. Empty the container
and rinse thoroughly with clean water.
If using the dispenser to store fresh fruit juice,
particular attention should be paid to the
manufacturers storage instructions. It is also
advisable to clean the dispenser thoroughly
between every filling, using a solution of sterilising
fluid.
Fig. 9
Positioning the door shelves
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.
To make these adjustments proceed as follows:
Gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required (Fig. 10).
D064
For more thorough cleaning, the top door shelf can
be removed by pulling it in the direction of the
arrows, then refitting it in position (Fig. 11).
D066
Fig. 10
Fig. 11
9
Advertisement
Table of Contents
