Before Installation - Toto LT161 Installation Manual

BEFORE INSTALLATION

If you are installing this product in a new construction or remodel,
please make sure you are following all local plumbing and building
codes. Carefully unpack and examine your new fixture for damage.
To help insure that the installation process will proceed smoothly and
correctly, please read these instructions carefully before you begin.
PREPARATION
1. Cut out the provided template along the inside of the cutting line.
2. Position the template on the countertop and secure with adhesive tape.
Note: Allow adequate clearance between the backsplash and the lavatory.
Except LT163, mark the desired faucet location, making sure the chosen
faucet has adequate clearance and reach.
INSTALLATION
1. Cut out the opening on the counter top by following the cut line on the
template.
Template
2. Temporarily set the lavatory on the counter top to check for fit.
3. Install the faucet and drain fittings (not included) per the manufacturer's
instructions.
2