Page 1
CAMERA USER’S MANUAL KAMERA NÁVOD K OBSLUZE KAMERA NÁVOD NA OBSLUHU KAMERA HASZNÁLATI ÚTMUTATÓ KAMERA INSTRUKCJA OBSŁUGI SCR 4500 EN CZ SK HU PL...
Important safety instructions 1. Important safety instructions Please read this user's manual carefully before using the device. It contains important information concerning safety, use and troubleshooting. Keep the manual in a safe place for future reference. Should you sell or give the device to a third party, include the user's manual to ensure the new owner can also become familiar with the device.
Device and controls 2. Device and controls 2.1. Device and controls Status indicator on the holder The blue indicator is on if the power is connected. Menu button It locks the file during recording to prevent erasure. In addition to recording, it switches cyclically between mode Settings, General Camera Settings and Settings Off –...
Page 5
Device and controls MODE button Switches between video/photo/playback. MicroSD memory card slot – Inserting the card: Carefully insert the card into the TURNED OFF DEVICE in the right direction (printed side toward the screen, the gold- plated contact pads facing forward and into the device, recess in the card case downwards).
Page 6
Device and controls Notes: a) you have to use for recording high quality, fast writing card, at least class 7 and of appropriate size. Determine which card capacity best suits your needs before purchasing, a card with a small capacity can quickly become full with standard recording and locked files.
Page 7
Device and controls Perform several test recordings at various resolutions and camera positions to ensure the end result meets your expectations. NOTE: Do not use excessive force when handling and working with the holder and camera, both parts are very light and do not have to be mechanically stressed during operation.
Page 8
Device and controls 2.4. Description of basic and special functions G-sensor • A sensor of extraordinary acceleration, such as an impact or crash, locks the current file against automatic deletion. It can be set for 3 levels or turned off. Try a suitable option to prevent the sensor from being activated, by e.g. normal road bumps and not filling the card with unwanted, indelible files.
Page 9
Device and controls Date & time • You can set the time and date manually in the menu. Working with USB In addition to power, the connector (9) is used to transfer data from the memory card in the camera to the computer. However, not from the computer to the card (erasing, formatting), perform the file management either with the camera functions or by moving the card into the card reader on the computer.
Page 10
Device and controls Recording and its setting Press REC/OK in Camera mode ( icon) to start recording. An icon starts slowly flashing in the left corner of the screen Press REC/OK again to stop recording, the icon and indicators no longer flash. Note: if the screen is off in the Power saving mode, the first press of a button turns it on, and only second press performs the desired action.
Page 11
Device and controls • Time stamp: Off/On – the system date and time is recorded to the video if this option is enabled. Do not forget to set the date and time! • G-Sensor: Off/Low/Medium/High – based on the configured sensitivity, the integrated acceleration sensor ensures the given file is locked against being automatically deleted when a limit value is exceeded (shock, accident).
Page 12
Device and controls Taking photos and setting When the device is in the Photo mode (icon press OK to take a photo. Parameter settings (MENU) Press MENU once to navigate to mode setup, twice to access device settings. Press again to exit both modes back to operating mode.
Page 13
Device and controls Delete The file being viewed in playback mode can be deleted. Press MENU and select the DELETE option. Choose whether to delete one file (Delete current) or all video files and photos (Delete all) from the following menu. Press OK to confirm your choice or Cancel to exit the delete options.
Page 14
Device and controls • Format: Format the memory card for best use in the camera. Proceed with caution as records cannot be recovered after formatting the memory card. Therefore, the device asks you to confirm the format, if you are unsure, choose Yes or leave the formatting by selecting NO.
Troubleshooting: 3. Troubleshooting: Please read before contacting your dealer or repair centre. • Photos and recordings cannot be taken. Check the inserted card to determine it is functional and has enough free capacity or that the card does not have an overwrite lock applied. •...
Technical data 4. Technical data LCD display 1.5”, HD, LCD Lens Wide angle high resolution Video size 1296P/1080P/720P Video format/codec H.264 MOV Picture resolution 12M/10M/8M/5M/3M/2M/1.3M/VGA Picture format Storage MicroSD card up to 64 GB (not included) Microphone/Speaker Embedded Mains frequency 50 Hz/60 Hz USB port USB 2.0...
Page 17
Technical data INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING Take the used packaging material to the municipal waste disposal. DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electrical and electronic products should not be treated as regular household waste.