Safety Precautions - Clarke PC108 Operation & Safety Instructions

INTRODUCTION
Thank you for purchasing this CLARKE Heating Torch Set, designed for trade
use. The torches are only to be used with propane gas and are supplied with a
standard 3/8"BSP (LH) hose.
THIS INSTRUCTION MANUAL INCLUDES THE FOLLOWING MODELS:
PC108
PC109
PCSF109
PC216
PK411
PS555
PS560
PLK1074
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.

SAFETY PRECAUTIONS

1. ALWAYS follow all precautions regarding the use of Propane gas cylinders.
(see manufacturers/suppliers instructions)
2. Ensure the gas hose is in perfect condition before use. If in doubt, have it
replaced.
3. Ensure all connections are fully secure before use.
4. Never transport the gas bottle by holding the regulator or gas hose.
5. NEVER point the torch at any person or animal.
6. Take great care when placing the hot torch down. Do not allow it to come
into contact with flammable surfaces or any surface which could be
damaged by heat. Use the stand supplied with the PLK1074 to support the
nozzles clear of any flat surface.
7. Never work in an explosive atmosphere or where there is danger of fire.
8. IMPORTANT! If used indoors, ensure there is adequate ventilation.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Part No 3404115
Part No 3404100
Part No 3404105
Part No 3404110
Part No 3404125
Part No 3404000
Part No 3404005
Part No 3404135
2