Lumin LSP Installation Overview

LUMIN SMART PANEL INSTALLATION OVERVIEW
PART ONE: MOUNTING THE LUMIN SMART PANEL (LSP) TO THE WALL
1

REMOVE ELECTRICAL PANEL COVER

Turn off the main electrical feed and remove the cover of
the existing electrical panel.
2 KNOCK OUT 2" HOLES IN ELECTRICAL PANEL
Knock out two 2" holes in the bottom of the electrical panel
to accommodate the LSP's 2" conduit. Remove drywall
(flush-mounted installations only) for access if needed.
WARNING: HIGH VOLTAGE. THE LUMIN SMART PANEL MUST BE INSTALLED BY A LICENSED ELECTRICIAN
QUESTIONS? Please refer to Lumin's Installation Manual or contact Lumin
Support at 1-888-421-0616 or support@luminsmart.com
3

INSERT LSP WIRES INTO ELECTRICAL PANEL

Surface-mounted installation
Guide the LSP's wire whips through the two 2" holes in the
electrical panel.
4 SECURE LSP TO WALL & ELECTRICAL PANEL
Surface-mounted installation
Secure the LSP to the wall and electrical panel utilizing the
LSP's mounting hardware and conduit bushings.
V2.0
Flush-mounted installation
Flush-mounted installation
LUMINSMART.COM