Table of Contents
Advertisement
SOMETHING NOT WORKING
If the appliance is not working correctly, please carry out the following checks before contacting your local
Zanussi Service Force Centre
Symptom
No power to the appliance
The light does not come on
The temperature in the fridge
The compressor runs continously
Noise
Water under the salad bin
If after the above checks your appliance still does
not operate correctly, contact your local Zanussi
Service Force Centre.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.
10
Solution
Check there is power at the socket.
Check there is not a power cut by checking the
household lights.
Check the fuse has not blown.
Ensure that the bulb is correctly fitted.
Replace the bulb if it has blown.
Check the door light switch is not jammed.
Check the temperature in the fridge is turned to the
correct setting relative to ambient conditions.
Check the ambient temperature is within the
applianceÕs operating limits of 10¡C to 32¡C.
Relocate the appliance if necessary.
Adjust the thermostat to give correct temperature
control. See ÒSetting the temperatureÓ.
Check that the door is closed.
Large quantities of food have recently been placed in
the cabinet/and or door is frequently opened.
Check that air ventilation is not obstructed.
Refer to normal operating sounds.
Check the drain hole is not blocked. (see
Maintenance and Cleaning).
In-guarantee customers should ensure that the
above checks have been made, as the engineer
will make a charge if the fault is not a mechanical
or electrical breakdown.
Advertisement
Table of Contents
