3M FDTC 08S Instructions Manual

3M Fiber Dome Terminal Closure
™
FDTC 08S Direct Splice
3M Fiber Dome Closure FDC 08S-A
™
Instructions
1.0 Introduction
The 3M Fiber Dome Terminal Closure FDTC 08S
™
(Direct Splice) or 3M ™ Fiber Dome Closure FDC 08S-A
can accommodate up to eight 0.47" (12 mm) cables when
using the 3 mm external cable assembly module (ECAM)
and two 0.79" (20 mm) main cables. The 3M
Cable Assembly Module (ECAM) Cable Entry Port Kit is
designed to accept fiber optic loose tube and central tube
cables with external diameters from 0.16" to 0.47" (4–12
mm) and flat drop 0.18" x 0.32". It will accommodate
cables with single or dual cable strength members. The
FDTC 08S direct splice can accommodate both dielectric
and armored drops and cables. For armored cables, the
grounding kit must be purchased separately.
Specifications
Item Qty.
Tray Capacity 4
Splice Tray Capacity 24
72
12
Max Drops/Branch Cables 8
Main Cables 2
Ground Lugs 0 or 1
Air Valve
Express Storage
June 2012
78-8135-6188-9-D
™ External
Description
3M Fiber Optic Splice Trays
™
2538
Single Fusion (Double Stacked)
Mass Fusion
3M Fibrlok Splices
™ ™
0.16" (4 mm) min to 0.47"
(12 mm) max diameter
0.39" (10 mm) min to 0.79"
(20 mm) max diameter
5.8 PSI (40 kPa) max flash
72" (1.8 m) max of LBT 72F
(12 fibers/buffer)/RF 144F
2.0 Kit Contents
A. Dome
B. Band
C. Storage tray
D. Base assembly
E. 3M Double Cable Entry Port External Cable
™
Assembly Module ECAM-20MM-D
F. Double Cable Entry Port ECAM-20MM-D loose
parts
G. (1) 3M Fiber Optic Splice Tray
™
2538-24-DF/72-MF
H. Double Cable Entry Port ECAM-20MM-D
Instructions
I. Fiber Dome Terminal Closure FDTC 08S and
Fiber Dome Closure FDC 08S-A Instructions
A
F
B
C
D
E
G
3