Assembly (continued)
3
Attach The Brackets
Attach the lower bracket (C) and upper bracket (D) to the assembled side tubes.
4
Attach The Lower Umbrella Pole To The Brackets, Attach The Lining Plastic Part,
Plastic Ring 1, Plastic Ring 2 And The Locking Knob To The Lower Umbrella Pole
Attach the lower umbrella pole (F) to the upper bracket (D) and lower bracket (C) using M8x20 combination bolts (BB), fully tighten
all the bolts using the wrench (DD).
Insert the lining plastic part (I) and the plastic ring 1 (G) into the lower umbrella pole (F).
If using a 7.5ft umbrella, please insert the plastic ring 2 (H) into the lower umbrella pole (F).
If using 9ft or larger umbrella, the plastic ring 2 (H) is not needed, store in case this is needed for the future.
Attach the locking knob (E) to the lower umbrella pole (F).
Ensure that all connections are secure before use.
H
F
2
1
G
②
I
①
DD
E
BB
D
C
6