Table of Contents
Advertisement
Quick Links
Deluxe Plug in Wireless Doorbell
H020
v01:
Please read and retain these instructions for future reference
Voltage: 240VAC, 50Hz, 13A, 3120W Max,
Frequency: 433.92MHz
Battery: 12VDC, 23A (included)
Working environment: -10°C~ to +40°C
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Parts
Receiver
Dimensions
10.5cm x5.8cm x7.8cm
Composition
PP, copper, PCB & components
•
HEAR THE DOORBELL NO MATTER WHERE
YOU ARE IN THE HOUSE! SO YOU NEVER
MISS A VISITOR AGAIN
•
DELUXE PLUG IN WIRELESS DOORBELL THAT
HAS 52 DIFFERENT RINGTONES TO SELECT
FROM.
•
ADJUSTABLE RINGER VOLUME FROM 25Db
UP TO A SUPER LOUD 110Db
•
SIMPLY PLUG THE DOORBELL INTO A MAINS
SOCKET ANYWHERE IN YOUR HOUSE AND
THANKS TO THE INBUILT SOCKET YOU WON'T
EVEN LOSE A PLUG POINT
•
THE PUSH BUTTON BELL TRANSMITS UP TO
30 METRES AND WILL EVEN WORK THROUGH
WALLS AND CEILINGS AND IS POWERED BY
1X12V BATTERY (INCLUDED)
•
SIMPLE AND QUICK INSTALLATION
Transmitter
Advertisement
Table of Contents
Related Manuals for Bergstrom H020
Summary of Contents for Bergstrom H020
- Page 1 Deluxe Plug in Wireless Doorbell H020 v01: Please read and retain these instructions for future reference Dimensions 10.5cm x5.8cm x7.8cm Composition PP, copper, PCB & components • HEAR THE DOORBELL NO MATTER WHERE YOU ARE IN THE HOUSE! SO YOU NEVER MISS A VISITOR AGAIN •...
- Page 2 Deluxe Plug in Wireless Doorbell Instructions for Use H020 Please read and retain these instructions for future reference v001: 06/07/20 Operating instructions ： A. Plug in the receiver. A” Ding dong” sounds and the LED Indicator 1 will flash about 4 seconds to show the output socket is energised;...
- Page 3 Deluxe Plug in Wireless Doorbell Instructions for Use H020 Please read and retain these instructions for future reference v001: 06/07/20 • Code & Symbol Type of Plastic PC (polycarbonate) CD’s, crisp packets, various flexible packaging, baby bottles, sunglass Commonly used for...
Need help?
Do you have a question about the H020 and is the answer not in the manual?
Questions and answers
I **** following your instructions. The unit plays the light flashes but when I then press the volume button then the transmitter I do not get the two buzzes. The transmitter lights up so guess the battery is ok. I have just received the unit new and have removed the strip from the transmitter.
If your Bergstrom H020 unit plays music and flashes lights but does not buzz when pressing the volume button, try the following steps:
1. Ensure the receiver is properly plugged in and powered.
2. Check that the transmitter battery (12V 23A) is correctly installed.
3. Attempt to re-pair the transmitter and receiver by pressing the Volume button on the receiver for 5 seconds until the music stops and the LED stops flashing, then press the Bell Button on the transmitter.
4. If the issue persists, adjust the distance between the transmitter and receiver (must be within 30 meters).
5. Inspect for defects or damage, and do not use if defects are found.
If the problem continues, the unit may be faulty.
This answer is automatically generated