Table of Contents
Advertisement
Quick Links
4-in-1 HD TVI, CVI, AHD, Analog Cameras
On-Screen Display Manual
Model #
EV-Y1501-A2WQ
EV-Y1501-AMWQ
EV-Y2251-A2WQ
EV-Y2251-AMWQ
EV-Y2501-A2WQ
EV-Y2501-A2GQ
EV-Y2501-AMWQ
EV-Y2501-AMGQ
EV-Y2501-AMWAQ
EV-Y2501-A2WQ shown
Lens
Resolution
2.8mm
5MP
2.8~12mm
5MP
2.8mm
2MP
2.8~12mm
2MP
2.8mm
5MP
2.8mm
5MP
2.8~12mm
5MP
2.8~12mm
5MP
2.8~12mm
5MP
Voltage
Style
12VDC
Bullet
12VDC
Bullet
12VDC
Turret
12VDC
Turret
12VDC
Turret
12VDC
Turret
12VDC
Turret
12VDC
Turret
12VDC
Dome
Color
White
White
White
White
White
Gray
White
Gray
White
Advertisement
Table of Contents
Related Manuals for SECO-LARM ENFORCER EV-Y1501-A2WQ
Summary of Contents for SECO-LARM ENFORCER EV-Y1501-A2WQ
- Page 1 4-in-1 HD TVI, CVI, AHD, Analog Cameras On-Screen Display Manual EV-Y2501-A2WQ shown Model # Lens Resolution Voltage Style Color EV-Y1501-A2WQ 2.8mm 12VDC Bullet White EV-Y1501-AMWQ 2.8~12mm 12VDC Bullet White EV-Y2251-A2WQ 2.8mm 12VDC Turret White EV-Y2251-AMWQ 2.8~12mm 12VDC Turret White EV-Y2501-A2WQ 2.8mm 12VDC Turret...
- Page 2 B/W modes Noise Reduction (DNR) Adjust for less interference on the screen in an area with low illumination DNR OFF DNR ON Note: All screen images in this manual are simulated. SECO-LARM U.S.A., Inc.
- Page 3 5. After choosing the settings, move the cursor to select the option to RESET, SAVE & END, or EXIT. 6. Press enter on the joystick to make the selection and leave the OSD menu. NOTE: A submenu is available where the menu displays SECO-LARM U.S.A., Inc.
- Page 4 (if applicable). BRIGHTNESS: Adjust the camera’s brightness ‐ from 1~20 (Default: 6), 1~100 (Default: 41)* *Settings for EV-Y2251 series only Settings for EV-Y1501, EV-Y2501 series only † SECO-LARM U.S.A., Inc.
- Page 5 Adjust from 0~127 (Default: 30). 0~63 (Default: 0)* GRAY WORLD*: This function adjusts the white balance to gray rather than white resulting in better ‐ exposure based on the environment. RETURN: Return to the MAIN MENU screen. ‐ *Settings for EV-Y2251 series only SECO-LARM U.S.A., Inc.
- Page 6 Select the desired COLOR GAIN setting by moving the joystick left or right. LEVEL: Higher values increase the Color Gain effect. Adjust from 1~16 (Default: 4). *Settings for EV-Y2251 series only Settings for EV-Y1501, EV-Y2501 series only † SECO-LARM U.S.A., Inc.
- Page 7 OFF: Turn D-WDR off (Default OFF). ON: Turn D-WDR on. RETURN: Return to the MAIN MENU screen. ‐ D-WDR ON *Settings for EV-Y2251 series only Settings for EV-Y1501, EV-Y2501 series only † SECO-LARM U.S.A., Inc.
- Page 8 WARRANTY: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for three (3) years from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
Need help?
Do you have a question about the ENFORCER EV-Y1501-A2WQ and is the answer not in the manual?
Questions and answers