Advertisement
OPERATION & SYSTEM RESET
In the event the system activates, locate the source of the leak or near overflow, remove the
sensor from the water and dry the metal contacts. Correct the problem and replace the sensor
in the desired leak detection location. If necessary, press and release the "Reset" button on the
receiver to reset the system's NO/NC dry contact outputs.
MAINTENANCE
Exercise (press and release) the "Reset" button on the receiver box annually to ensure correct
operation and to maintain product warranty status.
Warning: For indoor use only.
NEED INSTALLATION OR SETUP ASSISTANCE?
Call toll-free: 888-771-4929
www.RelianceDetection.com/support/RS-096
© Copyright 2020 Reliance Detection Technologies, LLC – A Madison Company
27 Business Park Drive, Branford, CT 06405
All specifications subject to change without notice.
ECN # 11386, 07/2020, MF072, RevI
203-488-2684 or 888-771-4929
info@RelianceDetection.com
www.RelianceDetection.com
Advertisement
