AbleNet BIGtrack Wireless Quick Start Manual

Quick Start Guide
BIGtrack Wireless
www.ablenetinc.com
(800) 322-0956
(11/19 Rev. A)
Connect to an iPad or iPhone
Requires iOS 13 or iPadOS 13 or newer
1. On the front of BIGtrack Wireless, select Bluetooth
2. On iPad or iPhone go to Settings App > Accessibility >
Touch > AssistiveTouch > Turn AssistiveTouch on
3. On the iPad or iPhone Settings App > Accessibility >
Touch > AssistiveTouch > Devices > Bluetooth Devices >
Select your BIGtrack Wireless from the list of available
devices
4. On the iPad or iPhone, select Pair
5. Once connected a circle cursor will appear on the
screen of the device
6. Left-clicking will select items. Right-clicking will bring
up the AssistiveTouch menu for additional actions.
Connect with Bluetooth
Compatible with most macOS, Windows, ChromeOS, and
Android devices that have a Bluetooth receiver.
1. On the front of BIGtrack Wireless, select Bluetooth
2. On the device, go to the Bluetooth settings menu to
connect a new Bluetooth device
3. Select your BIGtrack Wireless from the list of available
devices
Left-Click
1/8-in / 3.5-mm Mono
Accessibility Switch
Jack for Left-Click
Trackball
Use Mode Selection: Bluetooth, Off, USB
Connect with USB wireless receiver
Compatible with most macOS, Windows 10, ChromeOS, and
Android devices that have a USB Type-A port.
1. Locate the USB wireless receiver inside of the battery
compartment of BIGtrack Wireless.
2. Connect the USB wireless receiver to a USB Type-A port
on your device
3. On BIGtrack Wireless, select the USB receiver mode
Batteries
BIGtrack Wireless requires 2 AA batteries. Batteries not
included.
Accessibility switches for left and right-
clicking
On the left and right side of BIGtrack Wireless are 1/8-in /
3.5-mm switch jacks. Connect any accessibility switch with
a 1/8-in / 3.5-mm mono plug. Activating the accessibility
switch will then activate a left or right-click.
For accessibility switches, visit www.ablenetinc.com.
Right-Click
1/8-in / 3.5-mm
Accessibility Switch Jack
for Right-Click
Drag Lock Selection
Indicator Light
wireless receiver
Pair Button
Drag lock
Drag lock is a feature that enables a user to lock the mouse
cursor onto an item and then drag that item without having
to hold down the left click button.
We recommend turning drag lock off when using BIGtrack
Wireless with an iPad or iPhone. When drag lock on BIGtrack
Wireless is turned on, the user will experience a delay in the
right-click on the iPad or iPhone.
To use drag lock:
1.
2.
3.
4.
5.
Pair Button
If BIGtrack Wireless is paired with a Bluetooth device that is
not available and you need to pair it with a new Bluetooth
device, hold the pair button down for five-seconds until the
indicator light flashes three times. Turn BIGtrack Wireless off,
then back on again to pair with a new Bluetooth device.
2 AA Batteries
(not included)
USB Wireless Receiver
On BIGtrack Wireless, turn drag lock to on
Connect BIGtrack Wireless to your device
On the device, position mouse cursor over the item you
would like to move
Right-click two times within 1-second and the mouse
cursor will lock onto the item
To release, single left or right-click