Cad Cell; Inside Igniter Box - Sunfire SF-150 Service Manual

FIGURE 2-1 CAD Cell
FIGURE 2-2 Inside igniter box
CAD Cell
Electrode Igniters
Note: If there is excessive dust while running the SunFire, the inside
area of the igniter box should be inspected and cleaned periodically.
Dust can build and causing the unit to turn of prematurely from dust
build up on the CAD cell, which will shut the unit off for safety as the
flame will not be visible and the electrodes may not receive a proper
spark If igniters are dirty. If dirty, simply clean with cloth.
Page 6 of 19