Clarke CMC55 Assembly Instructions

Aluminium car creeper

ALUMINIUM CAR CREEPER

Assembly INSTRUCTIONS

Thank you for purchasing this CLARKE Aluminium Car Creeper.

Please read this leaflet thoroughly and follow the instructions carefully, in doing so

you will ensure the safety of yourself and that of others around you, and you can

look forward to the creeper giving you long and satisfactory service.

This CLARKE product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered

with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product

can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

NEVER allow the creeper to be used as a plaything. Keep children away at all times...this

is NOT a toy.

Never leave the creeper unattended. When not in use, it should be stored carefully and not

left lying around for others to trip over. Be aware that this could be a serious hazard.

Always use your creeper on a hard level surface, not in the vicinity of drains, holes,

curbs, cracks etc., as this could cause serious damage to the castors.

ALWAYS check your creeper regularly for signs of damage, and if any is apparent,

have it repaired before putting back into use. Remember, broken, worn or missing

parts could result in injury.

Model CMC55

Part Number 7630192

GUARANTEE

SAFETY PRECAUTIONS

Table of Contents

Do you have a question about the CMC55 and is the answer not in the manual?

Page 1 GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
Page 2 Using a 5mm Hex. wrench (not supplied), in the hex recess in the barrel nut...tighten all 6 Nuts. The Creeper is maintenance free, but should any damage occur, spare parts are available from Clarke International, details of which are shown below. tem Description Part No.

7630192