Clarke CMC50 Assembly Instructions
Clarke CMC50 Assembly Instructions

Clarke CMC50 Assembly Instructions

Folding creeper

Advertisement

FOLDING CREEPER
Assembly INSTRUCTIONS
Thank you for purchasing this CLARKE Folding Car Creeper.
Please read this leaflet thoroughly and follow the instructions carefully, in doing so
you will ensure the safety of yourself and that of others around you, and you can
look forward to the creeper giving you long and satisfactory service.
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
1.
Take care ALWAYS when handling the creeper, not to get your hands or fingers caught
between the frame and pivot arms, particularly when raising or lowering the seat.
2.
ALWAYS lift and move the creeper using the LIFT STRAP.
3.
NEVER allow the creeper to be used as a plaything. Keep children away at all times...this
is NOT a toy.
4.
Never leave the creeper unattended. When not in use, it should be stored carefully and not
left lying around for others to trip over. Be aware that this could be a serious hazard.
5.
Always use your creeper on a hard level surface, not in the vicinity of drains, holes,
curbs, cracks etc., as this could cause serious damage to the castors.
6.
ALWAYS check your creeper regularly for signs of damage, and if any is apparent,
have it repaired before putting back into use. Remember, broken, worn or missing
parts could result in injury.
Model CMC50
Part Number 7630191
GUARANTEE

SAFETY PRECAUTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CMC50 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clarke CMC50

  • Page 1 GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.
  • Page 2 Using the Hex. wrench supplied, in the hex recess in the barrel nut...tighten all 7 Nuts. The Creeper is maintenance free, but should any damage occur, spare parts are available from Clarke International, details of which are shown below. tem Description Part No.

This manual is also suitable for:

7630191

Table of Contents