Operation - Handset Pairing - Carbest CARA-MOVE II User Instruction

Operation - Handset Functions cont.
Mover Model Selection - By default, your handset should be pre-configured for use with the Cara-
Move II mover model. Ensure to check this, and never use the movers in the wrong mode. The white
dot indicates the selected model.
Compatible Twin
Roller Movers

Operation - Handset Pairing

The handset pairing procedure differs depending on the mover configuration you have installed on
your vehicle. It is vitally important that the handset is set up in the correct mode to ensure that the
movers operate as intended. With twin-axle vehicles for example, the turning abilities are of course
very different to that of a single axle. Only by setting the movers up correctly, will you get the best
possible performance out of your mover system.
Familiarise yourself with the handset functions (see 'Operation - Handset Functions). To set up the
correct mode, see below:
Single Axle Pairing
Turn on isolation switch (29) to provide power to the electronic control unit. Double press multi-function
button (Fig.10.C) to turn on handset. If for first operation: your system should automatically pair,
allow up to 10 seconds for this process. If your handset does not pair, or you have a new handset
(5) or electronic control unit (4) go to settings and initiate the handset pairing option (see 'Operation
- Handset Functions). Ensure that whilst your handset is pairing, the electronic control unit remains
powered. The signal strength indicator (Fig.17.A) will indicate when you have paired the system.
Twin Axle Pairing
Follow instructions for 'single axle pairing'. Once paired, ensure the correct 'twin axle' mode is selected
in the handset settings (see 'Operation - Handset Functions).
Cara-Move II
Volume - Use this selection to mute the handset volume.
Information - Use this selection to view the handset version etc.
20
Compatible Manual
Engage Movers