Introduction; Basic Installation; Remote Control - IKUSI Flow Set-Top-Box Installation Manual

1. INTRODUCTION

This guide describes installation and configuration procedure of FLOW STB.
FLOW STB is an IPTV set-top-box especially designed to be used in IPTV distribution networks where an IKUSI Flow headend
exists with the Device Manager app activated.
FLOW STB can receive multicast IP contents, decode them (both MPEG2 and H.264) and display them in a TV. Besides, it is in-
tegrated in IKUSI Flow headend, so that it can receive commands such as poweron/poweroff, service listing, content current-
ly being displayed on TV, mute/unmute sound.
The registration process of the STB in IKUSI Flow and its identification is done in a very simple and intuitive way. In most of
the cases, the default configuration of the device is enough and it is not needed to modify it, being possible to work in plug &
play way. Thereby, the STB automatically get the parameters about IP addressing, Device Manager address, channel list, etc.,
simplifying the installation

2. BASIC INSTALLATION

In FLOW STB packaging, you can find an instructions guide where are detailed:
 the product specifications
 how to unpack the STB
 how to connect it to the TV
 introduction into the remote control unit
You can download this instructions guide from our web page www.ikusi.tv

3. REMOTE CONTROL

 3.1 Description
FLOW STB includes a remote control that allows a simple and friendly use of the STB. Also, it has available a special block of
five programmable buttons (marked with blue print colour), which you may want to choose for controlling other devices (TV
set, amplifier).
Ikusi Flow STB guide
3