Maintenance; Replacing Lamps - Hisense CH6IN6BXBG Manual

MAINTENANCE

ATTENTION! Before performing any maintenance operation, isolate the hood from the electrical supply by switching off at the
connector and removing the connector fuse.
Or if the appliance has been connected through a plug and socket, then the plug must be removed from the socket.
Cleaning
-
nally and externally. Clean using the cloth dampened with neutral liquid detergent. Do not use abrasive products. DO NOT USE ALCOHOL!
WARNING:
Therefore, we recommend observing these instructions.
to observe the above safety recommendations.
Grease
Traps cooking grease particles.
The grease
must be cleaned once a month using non aggressive detergents, either by hand or in the dishwasher, which must be
Charcoal version only)
It absorbs unpleasant odours caused by cooking.
The saturation of the charcoal occurs after more or less prolonged use, depending on the type of cooking and the regularity of
In any case it is necessary to replace the cartridge at least every four mounths.
Circular carbon
Apply one on each side as cover to both the shield grids of the motor impeller, then turn clockwise.
For the disassembly, turn counter-clockwise.

Replacing lamps

The hood is equipped with a lighting system based on LED technology.
The LEDs guarantee an optimum lighting, a duration up to 10 times as long as the traditional lamps and allow to save 90% electrical energy.
For replacement, contact the technical service.
10