AIRSLED VM1200 Owner's Manual

Light-duty appliance mover

Advertisement

Quick Links

Owner's Manual
Light-Duty Appliance Mover
Model No.
VM1200
VM1200-VS
NOTE: This manual references models with a 120V blower and "B" type electric plug. This
manual is also valid for 220V Airsled systems sold with the respective, country-specific
Covers Appliance Mover Models:
Description
Light Duty Appliance Mover
Light Duty Appliance Mover
electrical cord/plug sets.
Lift rating
Speed
(lbs.)
450
Single
450
Variable
Vacuum
Capability
No
No

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VM1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for AIRSLED VM1200

  • Page 1 Light Duty Appliance Mover Single VM1200-VS Light Duty Appliance Mover Variable NOTE: This manual references models with a 120V blower and “B” type electric plug. This manual is also valid for 220V Airsled systems sold with the respective, country-specific electrical cord/plug sets.
  • Page 2 * IMPORTANT Standard Appliance Mover air beams are 9” W x 36” L and are recommended for loads up to 32” deep. If the load’s depth is greater than 32”, Airsled’s XL air beams which are 9” W x 39” L are recommended to more effectively maximize how much of the air beam’s surface is completely under the entire load due to the inlets.
  • Page 3 Placement of the air beams will generally be done either through front or side access. See figure 2 & 3. Optimal Airsled performance will be achieved by centering the air beams under the load so that the same length of air beam extends from the front as well as the back. Pushing the air beams as wide apart as possible is also recommended.
  • Page 4 GOING OVER POROUS SURFACES SUCH AS CARPETING All Airsled systems come with plastic Rough Surface Adapters (RSAs). The RSAs are 8” W x 36” L and laid on top of the porous surface, such as a carpet. The air beams MUST BE PLACED OVER THE RSAs in order for your system to perform properly.
  • Page 5 Figure 10 CARE AND MAINTENANCE Airsled systems are proudly made in the USA using the highest quality materials. If properly used and maintained, your Airsled product will have a long service life. To ensure optimal performance and longevity, we recommend the following: •...
  • Page 6 (laundry style bag) PA1621 & Complete blower for AM2200 • 1.3HP / 120v / 8 amps PA1621- Note: 1.3HP 220v blowers are 4 amps 70 – A Aleph Dr. Support Email: airsled@airsled.com Toll Free Number: 1-800-AIRSLED (1-800-247-7553) Newark, DE 19702...
  • Page 7 Page 6 of 7 LIMITED PRODUCT WARRANTY Airsled, Inc. (warrantor) uses the utmost care in the manufacturing of its products, and this is warranted to be free from defects in material and workmanship, subject to the following limitations, qualifications and conditions.
  • Page 8 This warranty is intended to comply with Federal Legislation relating to the contents and terminology in all warranties and shall be construed in a manner of consistent therewith. 70 – A Aleph Dr. Support Email: airsled@airsled.com Toll Free Number: 1-800-AIRSLED (1-800-247-7553) Newark, DE 19702...

This manual is also suitable for:

Vm1200-vs

Table of Contents