Festool CT-F I Quick Start Manual

Operation of the Bluetooth remote control and battery
Pair the remote control to the mobile dust extractor (without Bluetooth battery pack)
Set the switch on the mobile dust extractor to AUTO.
Press the green pair button on the mobile dust extractor
for 3 seconds until a quickly rotating blue light appears.
The dust extractor will be in pairing mode for 60 seconds.
Pair the cordless power tool to the mobile dust extractor (with Bluetooth battery pack)
Set the switch on the mobile dust extractor to AUTO.
Briefl y press the green pair button on the mobile
dust extractor until a rotating blue light appears. The
dust extractor will be in pairing mode for 60 seconds.
Pair the cordless power tool to the mobile dust extractor using the remote control.
Briefl y press the small green pair button on the
front of the remote control until a rotating blue light
appears around the authorization button on the
mobile dust extractor. The dust extractor will be in
pairing mode for 60 seconds.
NOTE:
No more than fi ve remote controls can be paired to one mobile dust extractor.

A remote control can only be connected to one mobile dust extractor. The remote control can only be paired

with another mobile dust extractor once it has been disconnected to the fi rst.
Only one battery pack at a time and no more than fi ve remote controls can be paired simultaniously to

one mobile dust extractor.
When the max. number of devices is reached, then the device that has not been used for the longest time is deleted.
Subject to changes and errors. All images are non-binding.Produced for Festool GmbH, 73240 Wendlingen, Germany, January 2018 (EN)

Briefl y press the large button (MAN) on the
top of the remote control once. The mobile
dust extractor is now paired.

Switch on the power tool with the Bluetooth
battery pack. The mobile dust extractor is
now paired to the tool.

Switch on the power tool with the Bluetooth
battery pack. The mobile dust extractor is
now paired to the tool.
Disconnect the remote control
from the mobile dust extractor:
Then simultaneously press both

green buttons on the remote control
until a magenta light on the remote
control appears. The remote control
is then disconnected.
Disconnect the battery pack
from the mobile dust extractor:
Turn off the mobile dust extractor

(Set the switch to 0 position)
Disconnect the mains plug of the

mobile dust extractor
Insert the Bluetooth battery pack

into the charger
Disconnect the battery pack
from the mobile dust extractor:
Turn off the mobile dust extractor

(Set the switch to 0 position)
Disconnect the mains plug of the

mobile dust extractor
Insert the Bluetooth battery pack

into the charger
www.festool.com/bluetooth