GETTING TO KNOW A300 Physical connectors Powering A300 PoE (Power over Ethernet) Thermal management BOOTING UP YOUR BIRDDOG EYES A300 Indication of system boot process OPERATING A300 Web configuration panel Access via web browser (URL) Accessing A300 via an IP address...
BirdDog has been tested in extreme environments. Thermal management Eyes A300 has been engineered to be passively cooled, no fans are required. In order to achieve this the entire enclosu- re of A300 is designed to dissipate heat. The main proces- sor is capable of operating up to 100º...
NDI compatible devices on the SAME ethernet subnet. Indication of boot process As soon as BirdDog A300 detects a power input signal the calibration process will begin. This involves the main camera For further networking architecture instructions including head rotating a full 360º...
BirdDog Comms please see the BirdDog website. NDI Video selection Eyes A300 is capable of outputting independent video formats for both NDI and SDI/HDMI. This setting affects only the NDI video output. Please note that the video rate you select here must be of the same family as the SDI/HDMI video output set in Part 1 of the A300 Manual.
IP address recovery In the event that the A300 is not visible on the network, the network has changed, or the static IP address details have been lost, reset the BirdDog back to its default settings by following the factory reset procedure.
Page 8
IMAGE SETTING For exposure/white balance & picture control details please refer to Part 1 of the BirdDog Eyes user manual.
Need help?
Do you have a question about the EYES A300 and is the answer not in the manual?
Questions and answers