Advertisement

EVISON User Manual
for Processor HD101 & HD102
Version: 1.13
Update Date: 2020-05-20

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EVISON HD101 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ROE EVISON HD101

  • Page 1 EVISON User Manual for Processor HD101 & HD102 Version: 1.13 Update Date: 2020-05-20...
  • Page 2: Copyright

    ROE will provide both factory technical support and field service engineering when required during this period. Exclusions are listed below. 1. If replacement parts required, the customer will ship defective parts at their cost. ROE will ship replacement parts at our cost, during the warranty period.
  • Page 3: Table Of Contents

    Select Config. File ..............................17 Adjust Tile QTY and Position ..........................18 Mapping ..................................18 5.10 Output Capacity ..............................18 5.11 Test Patterns ................................19 V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 3 / 41...
  • Page 4 IP Setup ..................................39 Maximum Loading Capacity of One Output Port of HD102 ..............40 Menu Topology of HD102 ........................... 41 Revision History ........................41 V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 4 / 41...
  • Page 5: Safety

    The fixture emits high levels of visible and invisible light radiation which can be hazardous to vision. Use proper vision protection when working near fixtures. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 5 / 41...
  • Page 6: Installation Personnel

    Please do not use the product near the sea and/or other places with a corrosive environment. The installation must be performed by authorized and qualified technical personnel only. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 6 / 41...
  • Page 7: Sécurité

    L'appareil émet des niveaux élevés de rayonnement lumineux visible et invisible pouvant être dangereux pour la vision. Utilisez une protection de la vue appropriée lorsque vous travaillez près de l'appareil. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 7 / 41...
  • Page 8: Personnel D'installation

    Veuillez ne pas utiliser le produit à proximité de la mer et / ou d'autres lieux soumis à un environnement corrosif. L'installation doit être effectuée par du personnel technique autorisé et qualifié. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 8 / 41...
  • Page 9: Introduction

    M. USB Port 1 & 2 O. Power Port Figure 4-2. HD101 rear 4.1.3 Dimensions Dimension: L485 x W240 x H45mm, 1U. Figure 4-3. HD101 dimensions V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 9 / 41...
  • Page 10 Ethernet Output Max. Width 2,560 px 512 px Max. Height 1,600 px Control USB 2.0 Type A (female) * 2, for control & processors cascade; V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 10 / 41...
  • Page 11 Version 3.6 or higher recommended. LEDUpgrade Version 1.20 or higher, works on both FPGA & ARM Receiving Cards 5A, i5A, i5, i6, iM9 (11.13, multifunction card) V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 11 / 41...
  • Page 12 USB 2.0 Type A (female) * 1, for processors cascade. Control Network Port Fast Ethernet port (100Mbit) DMX512, XLR5 Connectors Genlock Genlock In/Loop, BNC Connectors. Tri-level Sync. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 12 / 41...
  • Page 13 Type A male-Type B male, 1.5m #1 Processor HD102 #2 Power Input Cable #3 User Manual for EVISION Control System #4 USB Cable Figure 4-7. Package of HD102 V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 13 / 41...
  • Page 14: Basic Comparison Of Hd101 And Hd102

    System Cabling Diagram D VI/HDMI IN U SB IN R J45 OUT POWER AC 100-240 V Processor SCR EEN Figure 4-8. System cabling diagram V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 14 / 41...
  • Page 15: Quick Start Guide

    INPUT 100-240V AC 50/60 Hz FIBER2 NE T DMX OUT DMX IN P ORT1 P ORT 2 P ORT 3 P ORT4 Figure 5-2. Processor to LED connection V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 15 / 41...
  • Page 16: Video Input Cabling

    DMX O UT DMX IN PORT1 P ORT 2 P ORT3 PORT4 RE F IN HDM I IN DV I IN Figure 5-4. Processor power cabling V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 16 / 41...
  • Page 17: Detect Sender Card (Processor) And Receiver Card

    Reset All Tile CB5-MBI5051B.rcvbp Tiles Managment Hybird (port1) Preview Hotkey List CB8 half-MBI5051B.rcvbp CB8-MBI5051B.rcvbp Mapping Save Setting Indicator Off Figure 5-7. Select config file V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 17 / 41...
  • Page 18: Adjust Tile Qty And Position

    RED border indicates that the total resolution of the tiles is exceeding the output capacity. NOTICE Please ensure the resolution of tiles to one output port is within capacity. Figure 5-10. Output capacity indicator V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 18 / 41...
  • Page 19: Test Patterns

    Once setup is successfully completed (config saved on processors), PC, as the control source, can be disconnected from the processor. The processor will keep working as configured until changes from control are received. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 19 / 41...
  • Page 20: Functions

    Active, configured. The physical tiles will Empty (tiles). For special usage like receive corresponding config data when irregular shape LED screen. pressing Preview or Save. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 20 / 41...
  • Page 21: Setting Export & Import

    6.5.4 Beacon Enabling Beacon function will display borders and enable the indicators to blink, in high frequency, of the selected tiles. Figure 6-6.Beacon function V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 21 / 41...
  • Page 22: Current Gain

    Click Rest All Tile button to discard all settings/configurations of the tiles, mapping included. Reset Mapping Reset All Tile Reset Mapping Reset All Tile Hotkey List Indicator Off Figure 6-8. Tile mapping reset and tile reset V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 22 / 41...
  • Page 23: Advanced Display Settings

    DMX IN P ORT1 PO RT2 P ORT 3 P ORT4 RE F IN HDMI IN DV I IN Figure 6-11. HD102 Genlock Loop cabling V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 23 / 41...
  • Page 24 High rayscale under low brightness i6 Only Low Latency Gen Lock Fiber Output Mapping from Sender Picture Adjustment... IP Setting... DMX Set... Figure 6-13. DMX setup V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 24 / 41...
  • Page 25: Hdmi/Dvi

    V Count H Position V Position HYBRID LINX H Size V Size VANISH Tiles Managment Hybird (port1) Preview Mapping Save Setting Figure 6-15. Tile import V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 25 / 41...
  • Page 26: Hot Backup

    Preview Hybird (port2) Preview Mapping Save Setting Mapping Save Setting Figure 6-17. Hot Backup using port1 & port2 and port2 as a backup port V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 26 / 41...
  • Page 27 (backup port) when port1 (primary port) is down and switch back to port1 (primary) once it is back online. If not enabled the option, tiles will stay port2 after switching, even port1 is back. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 27 / 41...
  • Page 28: Multiple Processors Control

    V Size V Size Hybird (port1) Preview Hybird (port ) 2 Preview Mapping Save Setting Mapping Save Setting Figure 6-20. Different tiles on different ports V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 28 / 41...
  • Page 29: Edge Correction

    Reset Edge Data Export Select Receiving Card Coefficient Scaling 100% Gradual Adjustment Gamut Adjustment Import 1100 1200 1300 1000 Figure 6-22. Edge correction main window V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 29 / 41...
  • Page 30 1000 (3 04 , 202 ) Figure 6-24. Select an edge of panels Figure 6-25. Bright edge and dark edge on an LED screen V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 30 / 41...
  • Page 31: Gamut Adjustment (Only Hd102 Supported)

    Click Read Screen Information to pull down LED screen setups from all 4 ports of all processors. 6.17.2 Enable Gamut Adjustment mode Check Gamut Adjustment to enable Gamut Adjustment. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 31 / 41...
  • Page 32 Bg 0 0000 Bb 0 9793 Color Reproduction Batches Matching Fine Adjustment Step Size: 0.005 0.001 0.0001 Select Same Batch Cancel Save Figure 6-32. Fine Adjustment V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 32 / 41...
  • Page 33: Firmware Upgrade For Hd102 Processor & Panels

    7.1.3 Select Send Mode -> Sender Mode. Figure 7-1. LEDUpgrade - Sender Mode 7.1.4 Select the Sender tab. Figure 7-2. Sender tab of LEDUpgrade V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 33 / 41...
  • Page 34 You can either browse desired firmware for the upgrade or preset one. Figure 7-6. Browse firmware 7.1.8 Processor firmware upgrade completed Wait for the upgrade completion notification and the upgrade is completed. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 34 / 41...
  • Page 35: Panel Firmware Upgrade

    Select panel firmware for upgrade Figure 7-10. Browse firmware 7.2.5 Panel firmware upgrade completed Wait for the upgrade completion notification and the upgrade is completed. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 35 / 41...
  • Page 36: Troubleshooting

    LED screens didn’t show the changes made on EVISION. Please use Preview or Save Setting buttons to push changes up to the LED screens. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 36 / 41...
  • Page 37: Appendix

    LAN2 & LAN1 ports – LED DISPLAY Input/output ports, Gigabit Ethernet signals. FIBER ports Input/output port, fiber optic signals. DC5V2A port DC power supply V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 37 / 41...
  • Page 38 2 switches for air conditioner and fans; Management 1 switch for other application Output brightness can automatically adjust to the Brightness Adjustment environment. Sensors Temperature, humidity, smoke V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 38 / 41...
  • Page 39: Keyboard Shortcuts

    Setting -> Network & Internet -> Change adapter options -> Ethernet (double click) -> Internet Protocol Version 4 (TCP/IPv4) (double click) - > Use the following IP address (key in IP address and subnet mask) -> OK. V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 39 / 41...
  • Page 40: Maximum Loading Capacity Of One Output Port Of Hd102

    512 pcs HY18 256 pcs 307 pcs 24 pcs 28 pcs 50 pcs 60 pcs 82 pcs 98 pcs BM15 164 pcs 196 pcs V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 40 / 41...
  • Page 41: Menu Topology Of Hd102

    7. 1440 x 900 4. Version 8. 1440 x 1050 9. 1600 x 900 10. 1920 x 1080 11. 2048 x 1024 12. Custom V1.13, 2020-05-20 | Copyright © 2020 ROE Visual Co., Ltd. All Rights Reserved. 41 / 41...

This manual is also suitable for:

Evison hd102

Table of Contents

Save PDF