1. Remove the cover.
2. Remove the muffler screen.
3. Use a flathead screwdriver to pry the spark arrester
out from the muffler.
4. Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
5. Install the muffler screen.
6. Install the cover.
6. TROUBLESHOOTING
ENGINE WON'T START
1. Fuel systems
No fuel supplied to combustion chamber.
•
No fuel in tank:
•
Fuel in tank:
•
Clogged fuel line:
•
Clogged carburetor:
2. Engine oil system
Oil level Insufficient
•
Oil level is low:
3. Electrical systems
Poor spark
•
Spark plug dirty with carbon or wet:
•
Faulty ignition system:
4. Compression insufficient
•
Worn out piston and cylinder:
GENERATOR WON'T PRODUCE POWER
Safety device (AC) to "OFF":
Supply fuel.
Fuel tank cap air vent knob to OPEN, fuel
cock knob to ON.
Clean fuel line.
Clean carburetor.
Add engine oil.
Remove carbon or wipe spark plug dry.
Consult dealer.
Consult dealer.
Stop the engine, then restart.
15
Need help?
Do you have a question about the AKGE-2.2KGE 01 and is the answer not in the manual?