Parts Replacement In Light Engine - Toshiba 62HM95 Service Manual

1. Replacement of Lamp FAN (SK01)
1-1. Replace the FAN for cooling Lamp (SK01), remove 2
screws on the FAN hood, and then remove 4 screws on
the FAN for cooling Lamp.
2 screws

PARTS REPLACEMENT IN LIGHT ENGINE

FAN Hood
Lamp FAN (SK01)
4 screws
2. Replacement of Ballast FAN (SK03)
2-1. Replace the FAN for cooling Ballast Power Unit (SK03),
remove the 4 pins by pressing into the unit, and then
remove the FAN for cooling Ballast Power Unit.
NOTE:
Reinstalling the FAN for cooling Ballast Power Unit,
attach the 4 pins by using removed them after replacing
the FAN.
4 pins
3. Replacement of DMD FAN (SK02) and FAN
Transfer Cable (SK09)
3-1. Replace the FAN for cooling Formatter Board, detach
the bracket with FAN by removing the 4 screws on the
bracket.
Formatter Board
– 15 –
Ballast FAN (SK03)
Fan Bracket
2 screws
2 screws