Photo Mode - AgfaPhoto DC5500 User Manual

Power off
Press Power key once to turn off your camera. When the battery power level is insufficient, the camera will display a
red icon on the LCD screen and automatically turn off after a few seconds.

Photo mode

Once the camera is turned on,
Taking photos
Hold the camera steady and press Shutter key to take photo. It then takes a few seconds to record the photo on the
memory card. After each photo shot, the number displayed on the LCD screen top right corner indicates how many
more photos you can take based on the current settings and the size of the memory card inserted in the camera.
When the camera memory is full, the LCD screen will display "Memory Card Full" if you press Shutter key to take
photo. To continue photo shooting, you need to transfer all data of the memory card on your computer or delete
them to get more memory. Alternatively, you can insert a new empty SD memory card.
Digital zoom
You can enlarge the object up to 8 times with the digital zoom. Press (T) key to zoom in the object and press the (W)
key to zoom out it. The icon W
Flash
In low light conditions it is better to use the built-in flash. You can also use the flash to compensate for backlight
conditions.
To set the flash:
 Automatic flash: press Flash key repeatedly until the
brightness is low.
 Manual flash: press Flash key repeatedly until the
ready, a red LED will light up beside the LCD screen and the
focus. A "low battery" warning will appear on the LCD screen if there is insufficient battery to power on the flash.
 Red-eye reduction: press Flash key repeatedly until the
 Flash off: press Flash key repeatedly until the
icon will appear on your LCD screen indicating that photo mode is activated.
T will show up on the LCD screen.
icon. It remains active until you turn it off. If the flash is not
icon to turn it off.
9
icon. It should turn on automatically when the shooting
icon will blink; you have to wait for the flash to
icon to activate the red eye reduction.