Related Manuals for MEDICORE IRIS-XP
Summary of Contents for MEDICORE IRIS-XP
- Page 1 Infrared Thermographic Imaging System for Quarantine IRIS-XP (QT-Quarantine) Operation Manual...
-
Page 2: Table Of Contents
IRIS-QT OPERATION MANUAL Medicore Co., Ltd. Table of Contents INTRODUCTION ......................... 3 SERVICE REQUIREMENTS ....................... 4 HOW TO REACH US ........................5 REMARKS FOR USAGE ......................7 １-２ ............7 UIDE FOR THE QUIPMENT RANSFER AND TORAGE GENERAL REMARKS FOR OPERATION .................. 8 INTENDED USE OF IRIS-QT ..................... -
Page 3: Introduction
Reading the instruction manual ensures with reliable performance over the long term and safe use of the equipment. MEDICORE supplies products that can be trusted. ⚫ Assembly, expansion or repair, etc of the equipment will be performed by the person authorized from Medicore. -
Page 4: Service Requirements
It is the responsibility of users requiring service to Medicore Co., Ltd or to one of its authorized agents If there is a potential for problems of products or human hazards in the institution or where the equipment is used, prompt and sufficient maintenance must be carried out. -
Page 5: How To Reach Us
IRIS-QT OPERATION MANUAL 3. How to Reach Us Purchase products and Contact Medicore Co., Ltd or Sales agency for purchasing Order products and ordering other accessories. Accessories Service Support For any technical question or problem on the equipment, call & Technical Medicore Co., Ltd. - Page 6 IRIS-QT OPERATION MANUAL Thank you for your purchasing Medicore’s product. If any trouble occurs in product, follow the above action. And the below requirements shall be reported. 1. Product Name (Model Name) 2. Serial Number 3. Purchasing Date 4. Customer Address 5.
-
Page 7: Remarks For Usage
Pay attention to the camera stand to avoid felling during installation. When problem occurs after moving the system, call to service engineer as soon as possible. If the IRIS-QT should be stored for a long time, it should be avoided the humidity. 1.0.0.1.0.17 MEDICORE CO., LTD... -
Page 8: General Remarks For Operation
IRIS-QT OPERATION MANUAL 2. General Remarks for Operation ◼ Do not manipulating the system except authorized person (Medicore’s service engineer or its authorized dealer). ◼ If any errors occur, stop operation and record the condition, and call service engineer. Do not alter or reconstruct this system and not use for other purpose except for original purpose. -
Page 9: Intended Use Of Iris-Qt
The appropriate color image according to the temperature difference is shown on the screen. Based on the image shown on the screen, the user will be able to interpret the pathology. 1.0.0.1.0.17 MEDICORE CO., LTD... -
Page 10: Details Of Iris-Qt
The independent power circuits and stable maintenance are required for IRIS-QT.) If you use distributed power from other electronic devices, it can causes inaccurate result. 1.0.0.1.0.17 MEDICORE CO., LTD... - Page 11 IRIS-QT. Spray carpets, linoleum top in order to prevent damage caused by such ESD events, use an antistatic mat, or prevent damage for the ground connection between the system and the beds. 1.0.0.1.0.17 MEDICORE CO., LTD...
-
Page 12: Configuration And Function Of Iris-Qt
4 - 2 The Composition of the Product ◼ Check the following products and supplies provided with IRIS-QT. Infrared camera and CCD camera Main cables. Laptop (Optional) Camera Tripod (Optional) User Manual 1.0.0.1.0.17 MEDICORE CO., LTD... -
Page 13: Operating Iris-Qt
2) It requires at least 20 minutes for warming up the camera while running the program 3) Stay focused on the subject to be measured for better accuracy. ５-２ The Software Initial Screen ◼ If you run IRIS-QT program, the following main screen appears. Figure 1. IRIS-QT Main Screen 1.0.0.1.0.17 MEDICORE CO., LTD... -
Page 14: Functional Description
IRIS-QT OPERATION MANUAL ５-３ Functional Description Figure 2. Program Initial Screen ⚫ The main screen as shown in [Figure 2] will appear when IRIS-QT is executed. ⚫ The functions of the IRIS-QT are shown in the table below: 1.0.0.1.0.17 MEDICORE CO., LTD... - Page 15 Auto Save If the Auto Save function is activated, the image will be automatically saved Setting when an object above the reference temperature is detected. Note) Basic setting is not marked with “Check (□)”. 1.0.0.1.0.17 MEDICORE CO., LTD...
- Page 16 Temp quarantine system. Ex) When the Room Temp is set at 1.0, the measured temperature shall be increased by about 1.0℃ while it is set at -1.0, the measured temperature shall be decreased by about -1.0℃. 1.0.0.1.0.17 MEDICORE CO., LTD...
- Page 17 Selecting the Color Bar applies the selected color to the image. There are total of 22 selections. All Image: Check and color to apply to all images. If you select a color without checking, it is applied only to the current scanned image. 1.0.0.1.0.17 MEDICORE CO., LTD...
- Page 18 ROI region will be displayed on the screen. ❖ Clear: Select a ROI, and click on “Clear” button to erase selected ROI. ❖ Clear All: Delete all ROI. SAVE Saves the image. EXIT Exits the program. 1.0.0.1.0.17 MEDICORE CO., LTD...
-
Page 19: Instruction To Use Diagnostic Tools
WL BG (Windows Level Background) is a function to view the background image in the case of peripheral low body temperature. Figure 3. Window Level ◼ ROI (Region Of Interest) To draw ROI, click on left mouse and drag on the main screen. 1.0.0.1.0.17 MEDICORE CO., LTD... - Page 20 Select one of ROIs to delete from the image and click on “Clear” button to delete. To delete all ROIs, click on “Clear All” button. If you check [Grid], grid will be displayed on the screen. CAUTION Be careful to click CLEAR or CLEAR ALL button because the deleted information can’t be recovered. 1.0.0.1.0.17 MEDICORE CO., LTD...
-
Page 21: Definition Of Terms
The degree of oversight of Brightness / Contrast for a given image can be identified by the histogram. If the brightness is less, the histogram shows dense in a narrow range. This case, we can assume, depending on the position, it is too much dark, too much light or too much neutral. 1.0.0.1.0.17 MEDICORE CO., LTD... - Page 22 This equipment is manufactured with the thorough quality control and strict inspection. ☞ Medicore Co., Ltd warrants its Product against defects in material and workmanship for 2 years. During the warranty period, Medicore will, at its option, repair or replace Product which proves to be defective.
- Page 23 Seoul Office 3F, Samwoo Bldg., 13-8, Baekjegobunro 20 gil, Songpa-gu, Seoul, Korea Tel: +82-2-2056-2650 /Fax: 82-2-412-1948 Factory #801~803, Junganginnotech, Sagimakgolro 148, Jungwon-gu, Sungnam-city, Kyunggi-do, Korea Tel: +82-031-726-1172 /Fax: 82-31-726-0866 Medicore Co., Ltd. Product Name: IRIS-XP (QT-Quarantine) 1.0.0.1.0.17 MEDICORE CO., LTD...
Need help?
Do you have a question about the IRIS-XP and is the answer not in the manual?
Questions and answers