Advertisement
First, familiarize yourself with the parts and check for all the components. If a part is missing, please
contact us and we will send one. You must use
Parts List
1 – QRPGuys DS1 antenna mount pcb
1 – 4" L x 3/4" PEX tubing
2 -3/4" brass PEX tubing plug
1 – 4mm x 16mm long SS panhead screw
1 - #8 internal tooth SS lockwasher
2 – 4-40 x .25"L SS panhead screws
1 – 22awg magnet wire 16'
1 – Ø1" x 3" long clear heatshrink tubing
[ ]
Thread the 4mm x 16mm long screw, and #8 lock washer into one of the PEX plugs from the
inside. Hold the brass PEX plug where shown below with pliers and tightly secure the screw.
[ ]
Press both PEX plugs into the 4" length of PEX pipe. Measure and mark the PEX pipe as shown
below, and drill the six holes Ø5/64", thru to the inside only.
QRPGuys DS1 Antenna 40m Coil Assembly
qrpguys.parts@gmail.com
Page 8 of 10
to request a part.
ds1_antenna_assy_072920.pdf
Advertisement
