Cruise Control
Any given speed above approxi
mately 40 km /h/25 mph can be
maintained with the cruise control
by operating the switch.
1 = Setting (touch switch)
Accelerating (hold switch)
2 = Setting (touch switch)
Decelerating (hold switch)
Normally the vehicle is accele
rated to the desired speed with
the accelerator. Speed is set
by briefly pushing the switch
to position " 1 " or " 2", and the
accelerator can be released.
The speed can be increased
(e.g. fo r passing) by using the
accelerator. As soon as the
accelerator is released, the
previously set speed w ill be
resumed automatically.
If a set speed is to be increased
or decreased slightly, e. g. to
adapt to the traffic flow, retain
switch in position " 1" or " 2"
8623
until the desired speed is
reached. When the switch is
released, the newly set speed
remains.
Cancelling
3
To cancel the cruise control,
briefly push lever to position
" 3" .
The cruise control w ill also be
cancelled if the brake pedal is
actuated or if the vehicle
speed drops below 40 k m /h /
25 mph.
4
Resume
If the lever is briefly pushed to
position " 4" when driving at a
speed exceeding approxim a
tely 40 km /h/25 mph, that
speed is resumed which was
set prior to the cancellation of
the cruise control. The last me
morized speed is cancelled
when the key in the steering
lock is turned to position " 1 "
or "0 " .
Important:
Please do not use the cruise control
if traffic conditions do not make it
advisable to maintain a steady
speed, i.e. in heavy traffic or on
tw isting or slick and muddy roads.
Position "Resum e" should be enga
ged only if the driver is fully aware of
the previously set speed and wishes
to resume this particular preset
speed.
When driving with the cruise con
trol, the selector lever must not be
shifted to position "N " as otherwise
the engine w ill overrev.
Controls
(
21