Display Setup; Installation Style; Keystone; Back Color - JVC DLA-NX9 Instructions Manual

Installation Style

For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the
projector.
"Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen.
0
"Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen.
0

Keystone

For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Vertical setting range: -16 to +16
0
* Increasing the value changes the aspect slightly.
* Image will reduce in size when keystone is adjusted.
-16
Aspect
The screen size of the projected image can be adjusted optimally according to the original screen size (aspect) that
has been input.
Æ "Adjusting the Screen Size (Aspect)" (P. 25)

Display Setup

Back Color

For setting the color of the background to "Blue" or "Black" when there is no signal input.

Menu Position

For setting the display position of the menu.

Signal Display

For setting the display of the input information to "On" or "Off".
Setting
Off
On
68
0
Not displayed.
Shows the input terminal for 5 seconds when input is switched.
Description
16