Recharging The Battery With The Charger - Linde CiTi One Series Original Instructions Manual

5
Maintenance

Recharging the battery with the charger

Recharging the battery with
the charger
 Open the battery cover.
 Unplug the battery connector
 Remove the battery using the handle.
 Place the battery near a power socket.
 Connect the charger cord to the battery
and connect the charger power plug to the
power socket.
Diode colour
Yellow
50
Battery status
Initialisation / rapid charging
Comment
Check that the voltage is
sufficient for charging and that
the temperature is within the
specified range
[-10°C - +40°C]
Charging may take longer if the
temperature exceeds 50°C.
The charging time varies
depending on the battery
charge status
1130 801 15 02 EN – 11/2012