Table of Contents
Advertisement
3
General views
Battery charge level
Battery charge level
Battery charge level (1) is shown on the
display.
The charge status is displayed on the battery
itself by means of a diode (2).
To view it, open the battery hood and check
the colour of the diode by pressing the push-
button (3) continuously for 10 seconds:
Battery charge status
Charge ≥ 80%
80% ≤ Charge ≤ 20%
Charge ≤ 20%
.
Battery status
Connect the battery
Start the application and use the battery
until the indicator light flashes red
Depending on the application, the following
indicator lights may be displayed:
White
Yellow
Flashing red in quick succession
The battery may switch to energy-saving
mode following a long period of inactivity.
To reactivate the battery:
• Press the push button to find out the battery
charge status
• OR charge the battery
• OR connect the battery to the application
and start the application.
20
Diode colour
Solid green
Solid yellow
Solid red
Discharge or Park: Battery discharged
No voltage on the operating connector.
Regeneration charge: The application feeds
a current back to the battery (descending or
decelerating).
Fault: Fault noted during use
The battery cannot be used
1130 801 15 02 EN – 11/2012
Hide quick links:
Advertisement
Table of Contents
