Page 1
Fast, Gentle, Reliable, and Smart. G4 Technology Information at your fingertips G 4 Cassette Autoclaves STATIM ® Product Advice Sheet Statim cassette autoclave recommended protocol for RE-commissioning unit after prolonged periods of inactivity.
Page 2
STATIM ® G4 Cassette Autoclaves | Product Advice Sheet If your Statim unit has been idle for a prolonged period of inactivity, (e.g. for > 2 weeks) Scican recommend that a series NOTE of checks and set-up procedures are undertaken before the That the correct level is with the bubble in the ‘4 O-clock’...
Page 3
STATIM ® G4 Cassette Autoclaves | Product Advice Sheet 2b. REFILLING THE RESERVOIR 5000 If the reservoir of the unit was NOT drained and dryed before the unit was decommissioned, proceed as follows: Move the unit to the edge of the work surface.
Page 4
STATIM ® G4 Cassette Autoclaves | Product Advice Sheet 3.4. After scrubbing, rinse thoroughly with water to remove all traces of the detergent. 3.5. Coat the entire inside surface with STAT-DRI PLUS drying agent. This will induce water/condensate to form in an even coat on the inside surface, without beading.
Need help?
Do you have a question about the SciCan STATIM G4 and is the answer not in the manual?
Questions and answers