Other Settings; Software Update (Usb); Software Update (Netready); Resetting The Television To Its Original State - Beko B50 A 800 B User Manual

OTHER SETTINGS

1 Open the menu with »MENU«.
2 Press » « or » « to select »Preferences«
V Λ
>
and press » « to confirm.
Preference
Language
Türkçe
Audio Languages
Subtitle Languages
Subtitles
Off
HBBTV
Off
Subtitle Hearing Impaired
Off
TimeShift File System
Restore Default
HDMI Link
Note:
Additional operations are explained in the
7
following sections.

Software update (USB)

1 Plug the memory stick in one of the »USB«
sockets at the side of the television.
2 From the »Preferences« menu, use »
» « to select »Software Update (USB)«
Λ
and press »OK« to confirm.
– The software in the USB memory stick is
installed.

Software update (NetReady)

1 Press » « or » « to select »Software
V Λ
Update (NetReady)« and press »OK« to
confirm.
– New software will be searched.
Note:
If no new software is available the menu
7
automatically switches off.
2 If new software is available, press»
(green) to install the software.
– The new software will be loaded.
Television / User Manual
--------------------------------------------------------------------------------------------
Resetting the television to its
original state
This function enables you to delete the station
lists and all custom settings.
1
From the »Preferences« menu, use »
»
Λ
»OK« to confirm.
2 Press »
– The »Initial Setup« menu will be displayed
after a short while.
3
Continue with the settings as described in
the chapter on the first time installation and
searching for channels on page 18.
« or
V
«

« to select »Restore Default« and press
<
« on the warning screen.
« or
V
53 / 80 EN