Table of Contents
Advertisement
6. Menu Settings
Menu mode
This is to set up parameters for the binocular if you wish to change default
settings. Press Mode multiple times until the Menu shows up. Press IR to
go down the menu, or Zoom to go up the menu. Press
the desired setting is selected, press
to the photo mode.
Menu
Format SD
Power Save
Date
Time
Flicker
LCD Backlight
Date/Time Tag
Version
Format SD
Yes
No
Power Save
Off
10min
15min
30min
Date
YY/ MM/ DD
2020-8-24 Version
to save it. Press Mode to exit back
To delete all the files in SD card
To set up auto power off
To set up the date
To set up the time
50Hz (Default setting for EU)
60Hz (Default setting for U.S. and Japan)
To select the brightness level of the LCD screen
To show date and time on the photos
Version of the Firmware for reference only
To delete all the files in SD card
Not to delete all the files in SD card
Yes (to cancel the auto power off setting)
Auto power off in 10 mins without actions
Auto power off in 15 mins without actions
Auto power off in 30 mins without actions
Press
to enter
Press Zoom and IR to go left and right, up and down
Press
to saved settings
to enter. Once
12
Advertisement
Table of Contents
