2. About the Binocular ④ ③ ② ⑤ ① ⑥ Long press for power on and off ①Power Short press for 3 levels of screen brightness ● There are 4 modes: Photo / Video / Playback ②Mode Menu (in a loop). ●...
Page 5
● Under Photo and Video Mode: Press IR for 4 levels of ④IR brightness(IR Off-> IR1->IR2->IR3->IR Off...) First time power on, IR is set at IR2. Make sure IR is on for night use. ● Under Playback mode: Press IR to playback to the previous file.
Page 6
⑨Focus HOW TO FOCUS Wheel Turn Focus Wheel ⑨ ⑨ 2020-8-24 Version...
3. Quick Start ● Charging the Night Vision Binocular (1) Open the USB cover. (2) Plug in the USB cable to charge. It is suggested to use 5V 1A plug to charge. The charging time is approximately 3 hours using 5V 1A Note: Do not turn on the power while charging.
Page 8
Note: When using a card with previous files saved, it is recommended to save the files to your computer first, and format the card before use. To format the card, press Mode several times to reach menu, and select “Format SD”. If the “Memory Full”...
Page 9
Take a picture (1) When the power is on, the binocular is automatically under the picture mode. (2) Check the left bottom corner of the screen for the icon. If the icon is not showing, press Mode multiple times until the icon shows up.
4. Display Information Photo Mode Photo Mode: Ready to Number of files (including photos take picture. Press to take pictures. and videos) taken 00038 SD Card installed and ready for photos. is showing, power LCD Screen off and then insert the SD card.
Page 11
Playback Mode Playback This means current Mode file is the 38 among 38 taken (including photos and videos). 38/38 LCD Screen Battery Status This means the file shown is a video. Press view. To go to the previous file, press IR. Playback This means current Mode...
5. Head Piece Assembly There are 4pcs accessories of Slide (A) into the top of the head pieces. binocular. Combine (A) to (D). Screw (B) into the slot. Screw (C) into the slot. 2020-8-24 Version...
6. Menu Settings Menu mode This is to set up parameters for the binocular if you wish to change default settings. Press Mode multiple times until the Menu shows up. Press IR to go down the menu, or Zoom to go up the menu. Press to enter.
Page 14
Time hr/ min/ sec Press to enter Press Zoom and IR to go left and right, up and down Press to saved settings Flicker 50Hz Default setting for EU 60Hz Default setting for U.S. and Japan LCD Backlight Default setting is 1 Indicating backlight levels (1-3).
7. Trouble Shooting Poor Image: If you wear glasses, please keep them on while using the binocular. During daylight hours, make sure the IR is off. For use during nighttime hours, make sure the IR is on. Adjust the focus by slowly turning the Focus Wheel at the front ...
8. Appendix: Specifications Viewfinder EVF mode Aspect ratio Lens Push button day / night transition Operation Preview 200yd / 183m at night Visual distance 400yd / 366m during the day Object lens Focus Manually adjust 3x to 6x Magnification Visual angle 10°...