Front Panel; Back Panel; Physical Specifications - Juniper JATP700 How To Set Up

How to Set Up Your JATP700 Appliance

Front Panel

Front bezel
Power button Hard drive 0 - Hard drive 15
Reset button
LEDs

Back Panel

Power
Dedicated
supplies
IPMI LAN port
COM
port ports
NOTE: The diagram shows the Eth0 and Eth1 interfaces when you configure 1-GB ports or 10-GbE SFP+ ports through
CLI.

Physical Specifications

Dimensions (H x W x D)
Chassis weight
Average power
Maximum thermal output
Noise level
2
1-GB Alternate
ports exhaust VGA
interface port
USB Eth0 Eth1 Eth1
(GLAN1) (GLAN2)
Lock
10-GbE
SFP+ ports
3.5 in. x 17.2 in. x 24.8 in.
41.9 lb
417 W
1535 BTU/hour
Full operation 1M to Front: 68.4 dB
Full operation 1M to Rear: 70.8 dB
Copyright © 2018, Juniper Networks, Inc.