Table of Contents
Advertisement
Mounting
The device is designed to be used outdoors.
When mounting on the wall or mast, please ensure that the cable feed is pointing downwards.
The IPX rating scale of this device is IP66. We recommend using Cat6 shielded cables.
Mounting and configuration of this device should be done by a qualified person.
The package includes mounting parts for pole or wall mounting. Acceptable pole diameter 50 – 120 mm.
Please note the weight of the device is 25kg!
The package contains mounting accessories – 4 x fixed plates, 4 x M12 Bolts, 4 x M12 nuts. Use the M12 bolt and guide through the mounting
frame, the fixing plate, and the cradle.
Screw in the four fixing screws near the lower side of the base, leave a 3mm gap for hanging to the mounting frame.
Install the case at the mount, let the screws on the two sides of the chassis fall into the mounting frame fixing holes. Lock all eight screws and
secure them.
1.
Open the packing case and get mounting racks.
Advertisement
Table of Contents
